Electro Optical Metal Deep Grey Car Wrap Film Moisture-Proof Durable And Non-Fading
- Can I put my wrapped car through a car wash?
Hand washing is best for vinyl wraps, but brushless or touchless car washes can be just as safe. You can even use a pressure washer if you’re gentle.
- How to remove vinyl from your car?
A.Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.
B.Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar Remover to remove any adhesive residue from the surface of the panel.
C. Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface.
D.Use your fingernail or plastic scraper to pull the wrap from the edges of the entire panel. It’s going to look gnarly, but it’ll all be gone in a few minutes.
- Will car wrap damage my car’s paint?
Actually, car wrap can protect your paint because it blocks damaging ultraviolet light. When you remove it, the original finish will be intact.
Product Specfications:
| 1. Face Film | Type: | Polymeric Calendered Vinyl Film | Thickness: | 120 µm |
| Surface Finish: | Matte | Color: | Matte Metallic |
| 2. Adhesive | Type: | Clear Removable Acrylic Adhesive |
| Thickness: | 30 µm | Color: | Clear |
| 3. Liner | Type: | Air-Egress PE-coated Paper Liner | Thickness: | 140gsm |
| 4. Max Durability | Up to 5-7 years |
| 5. Product Size | Width | Length |
| (metric/m) | (Imperial/inch) | (Metric/m) | (Imperial/yard) |
| 1.27 | 50 | 18 | 20 |
| 1.52 | 60 | 23 | 25 |
Notice: There is a Minimum Order Requirement for Special Product Size.
|
